Trunk insulation

[PDR521]

Hi Does anybody know where I can buy the original looking insulation that is fitted to the trunk lid between the inner and outer skins of my 58 Buick.

Regards
Peter

[58limited]

Try CARS, Inc. If they don't have it, maybe they know who does.


http://www.oldbuickparts.com/

[Smartin]

I know this thread is a few months old, but I ran into this problem with a 60 I was working on a couple years ago.

That trunk insulation is not replaceable. Buick put that stuff in there before they put the two panels together. Unless you think you can find the stuff, it will be difficult to replace. You'd have to cut it just a hair bigger than the opening itself, and somehow slip it in and glue it in place.

I ended up just painting over the stuff that was in there already.

Also, I just looked on my 58, and it has the original paint on the underside of the trunk lid. The insulation has the factory paint on it.

[58limited]

I saw a website by a European who had this same problem. He actually separated the two panels of the trunk lid and replaced the material. Sounds like a lot of work to me, but if you have the tools and the time, well why not?

My trunk lid has some issues inside: I can hear debris/rust when I open and close it and the insulation panel is getting shabby. I am friends with some outstanding body men and I'm going to ask them what it would take to separate the two panels on my trunk lid. But, I will probably end up removing the old insulation panel, shaking all of the debris out, and cleaning/sealing the inside the best I can before I replace the insulation panel - in pieces as Smartin suggests.