1958buickforum.net

I am rebuilding a 1958 364 enagine.
I have soaked the valley pan and it seemed to look good. I was ready to install and noticed crap falling out of baffles underneath.
I decided to cut spotwelds.
I am glad I did. I had a lot of crap inside as well as "steel Wool" in the baffle area. I removed as much of loose steel as I could and repacked it with #3 steel wool. Then spot welded it closed.
Just thought i would pass along this info for anyone who may want to know what's inside!

Hello! Do you have a book with the instruction how to repair a 364 buick engine?? You can reach me on my E-mail Trollhattan_raggers@hotmail.com. I would be happy if you can help me.